Eclipse GS-T FWD L4-1997cc 2.0L DOHC Turbo MFI (1997)
Temperature Sensor (Gauge): Testing and Inspection
Engine Coolant Temperature Gauge Unit Check
Engine Coolant Temperature Gauge Unit Check
1. Drain the engine coolant.
2. Remove the engine coolant temperature gauge unit.
3. Immerse the unit in 70° C (158° F) water to measure the resistance.
Standard value: 104 +/- 13.5 Ohm
4. After checking, apply the specified adhesive around the thread of engine coolant temperature gauge unit.
Specified Sealant: 3M Adhesive Nut Locking No.4171 or equivalent
5. Fill engine coolant.
