Eclipse GT V6-30L SOHC (2000) Powertrain Management: Initial Inspection and Diagnostic Overview
STEP 5. Check the combination meter connector C-42 and ETACS-ECU connector C-111 for damage.
If the combination meter connector C-42 and ETACS-ECU connector C-111 are damaged, repair or replace them. Refer to Harness Connector
Inspection.
The seat belt warning light should work normally.
If the connectors are in good condition, go to Step 6.
STEP 6. Check the harness wire between combination meter connector C-42 and ETACS-ECU connector C-111.
If the harness wire between combination meter connector C-42 and ETACS-ECU connector C-111 is damaged, repair it.
The seat belt warning light should work normally.
If the harness wire is in good condition, go to Step 7.