Eclipse GT V6-3.0L SOHC (2000)
Impact Sensor: Service and Repair
A side impact sensor is installed behind the center pillar trim on both driver and passenger sides of the vehicle.
WARNING:
1. Never attempt to disassemble or repair the side impact sensor. If faulty, replace it.
2. Do not drop or subject the side impact sensor to impact or vibration. Replace the side impact sensor, if denting, cracking, deformation,
or rust are present. Discard the old one.
3. Replace the side impact sensor after the air bag has deployed.
Pre-removal Operation
-
Turn the ignition key to the "LOCK" position.
-
Rear Seat Cushion Removal
-
Rear Sear Belt Removal
-
Quarter Trim, Lower Removal
REMOVAL SERVICE POINTS
<A> NEGATIVE (-) BATTERY CABLE DISCONNECTION
DANGER: Wait at least 60 seconds after disconnecting the battery cable before doing any further work.
