mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Sunroof - Judder/Vibration During Operation|Page 5259 > < Sunroof - Judder/Vibration During Operation|Page 5257
Page 7
background image

23.

Lower the drive cable assembly lift mechanism by using a flat-blade screwdriver to push it forward.

IMPORTANT

Push the lift guide to its maximum forward position. Confirm that the plastic tabs on the sides of the drive cable assembly are positioned inside
the guide rail.

SUNROOF TIMING

24.

To time the sunroof, use a flat-blade screwdriver to push the lift mechanism until the mark on the lift mechanism is aligned between the two marks
on the guide rail. (Marks are shown here as white for clarity.)

25.

Reinstall the front and rear sunshades.

26.

Reinstall the sunshade stoppers and screws.

27.

Reinstall the rear guide rail stoppers.

28.

Reinstall the roof drip channel.

Sunroof - Judder/Vibration During Operation|Page 5259 > < Sunroof - Judder/Vibration During Operation|Page 5257