mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Output Voltage Measurement|Page 3705 > < Output Voltage Measurement
Page 2
background image

NOTE:  The output waveform is low when the wheel speed is low. Similarly, it will be higher as the wheel speed increases. Waveform may
also be observed by driving the vehicle.

POINTS IN WAVEFORM MEASUREMENT

NOTE:  The wheel speed sensor cable moves in relation to motion of the front or rear suspension. Therefore, it is likely that it has an open circuit
only when driving on rough roads but it functions normally when driving on smooth roads. It is recommended to observe sensor output voltage
waveform also under special conditions, such as driving on a rough road.

With TCL

WHEEL SPEED SENSOR OUTPUT VOLTAGE MEASUREMENT

Refer to With ABS.

Output Voltage Measurement|Page 3705 > < Output Voltage Measurement