Eclipse RS L4-2350cc 2.4L SOHC MFI (2002)
2. Idle the engine for one to three minutes to warm it up.
3. Repeat the operation pattern, shown in left figure, at no load to check for abnormal noise. (Usually the abnormal noise is eliminated after repetition
of the operation 10 to 30 times. If, however, no change is observed in the level of abnormal noise after repeating the operation more than 30
times, suspect that the abnormal noise is due to some other factors.)
4. After elimination of abnormal noise, repeat the operation shown in left figure five more times.
5. Run the engine at idle for one to three minutes to make sure that the abnormal noise has been eliminated.
