mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Diagram Information and Instructions|Page 5622 > < Diagram Information and Instructions|Page 5620
Page 9
background image

TIGHTENING TORQUE INDICATION

The tightening torque indicates a median and its tolerance by a unit of Nm (in-lb) or Nm (ft-lb). For fasteners with no assigned torque value, refer to
Tightening Torque.

SPECIAL TOOL NOTE

Only MMC special tool part numbers are called out in the repair sections. Please refer to the special tool cross reference chart located at the beginning of
each group for a cross reference from the MMC special tool number to the special tool number that is available in your market.

ABBREVIATIONS

The following abbreviations are used for classification of model types.
M/T:  Indicates manual transaxle, or models equipped with manual transaxle.
A/T:  Indicates automatic transaxle, or models equipped with automatic transaxle.
MFI:  Indicates multiport fuel injection, or engines equipped with multiport fuel injection.
A/C:  Indicates air conditioning. 
2.4L Engine:  Indicates the 2.4 liter <4G64> engine, or a model equipped with such an engine.
3.0L Engine:  Indicates the 3.0 liter <6G72> engine, or a model equipped with such an engine.
PCM: Powertrain control module
ECM: Engine control module

SWS: Simplified Wiring System

Wire Color Codes

Diagram Information and Instructions|Page 5622 > < Diagram Information and Instructions|Page 5620