Eclipse RS L4-2350cc 2.4L SOHC MFI (2002)
Simplified Wiring System: Reading and Clearing Diagnostic Trouble Codes
Clearing Diagnostic Trouble Codes
ERASING DIAGNOSTIC TROUBLE CODES
When Scan Tool is used
Connect the scan tool to the data link connector then erase the diagnostic trouble codes.
When the Scan Tool is not used
With the ignition switch OFF, disconnect the battery negative terminal for 10 seconds or more.
How to Connect SWS Monitor
HOW TO CONNECT SWS MONITOR
CAUTION: Always turn the ignition switch to the "LOCK" (OFF) position before connecting or disconnecting the SWS monitor kit and scan tool
MB991502.
1. Remove the steering column cover.
2. Remove the steering column switch connector.
3. Connect the SWS monitor harness (for column-ECU).