Eclipse RS L4-2350cc 2.4L SOHC MFI (2002)
STEP 8. Check the wiring harness between column switch connector C-86 and ground.
NOTE: Also check joint connector C-78. If joint connector C-78 is damaged, repair or replace the connector as described in Harness Connector
Inspection.
Q: Is the wiring harness between column switch connector C-86 and the ground in good condition?
YES: No action to be taken.
NO: Repair the wiring harness. The system should communicate with the column switch (column-ECU) normally.
STEP 9. Check column switch connector C-86 and ETACS-ECU connector C-118 for damage.
Q: Are column switch connector C-86 and ETACS-ECU connector C-118 in good condition?
YES: Go to Step 10.
NO: Repair or replace the connector. Refer to Harness Connector Inspection. The system should communicate with the column switch (column-ECU)
normally.