Eclipse RS L4-2350cc 2.4L SOHC MFI (2002)
Connectors
CIRCUIT OPERATION
-
Power to the sunroof motor assembly is supplied through battery and fusible link (5).
-
When the ignition switch (IG2) signal is on, the sunroof motor assembly is ready to operate.
TECHNICAL DESCRIPTION (COMMENT)
The power supply circuit or the communication circuit to the sunroof motor assembly or the sunroof motor assembly may be defective.
TROUBLESHOOTING HINTS
-
Malfunction of the sunroof motor assembly
-
Damaged harness wires or connectors
DIAGNOSIS
Required Special Tool:
-
MB991223: Test Harness Set
-
MB991502: Scan Tool (MUT-II)
-
MB991862: SWS Monitor Kit
STEP 1. Check sunroof motor assembly connector D-06 by backprobing in order to the fusible link (5) line of the power supply circuit to the
sunroof motor assembly.
1. Measure at sunroof motor assembly connector D-06 without disconnecting it.