Eclipse RS L4-2350cc 2.4L SOHC MFI (2002)
STEP 6. Check the wiring harness from ETACS-ECU connectors C-117 and C-119 to driver's door lock actuator connector E-13.
NOTE: Also check intermediate connector C-91 and junction block connector C-108. If intermediate connector C-91 or junction block connector C-108
is damaged, repair or replace the connector as described in Harness: Connector Inspection.
Q: Is the wiring harness from ETACS-ECU connectors C-117 and C-119 to driver's door lock actuator connector E-13 in good condition?
YES: Replace the ETACS-ECU. Check that the central door locking system works normally.
NO: Repair the wiring harness. Check that the central door locking system works normally.
Inspection Procedure C-2
Central Door Locking System: Some Doors do not Lock or Unlock.