mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 1998 > < Initial Inspection and Diagnostic Overview|Page 1996
Page 81
background image

STEP 3. Check power window main switch connector E-12 and front power window motor (LH) connector E-11 for damage.

Q: Are power window main switch connector E-12 and front power window motor (LH) connector E-11 in good condition?

YES: Go to Step 4.

NO: Repair or replace the connector. Refer to Harness Connector Inspection. When the power window main switch is operated, the front power
window (LH) should open and close normally.

STEP 4. Check the wiring harness between power window main switch connector E-12 and front power window motor (LH) connector E-11.

Q: Is the wiring harness between power window main switch connector E-12 and front power window motor (LH) connector E-11 in good condition?

YES: No action to be taken.

NO: Repair the wiring harness. When the power window main switch is operated, the front power window (LH) should open and close normally.

Inspection Procedure D-4

Power Window: Only Power Window (RH) does not Work by Operating Power Window Sub-switch.

Initial Inspection and Diagnostic Overview|Page 1998 > < Initial Inspection and Diagnostic Overview|Page 1996