Eclipse RS L4-2350cc 2.4L SOHC MFI (2002)
STEP 10. Check combination meter connector C-42 and ETACS-ECU connector C-118 for damage.
Q: Are combination meter connector C-42 and ETACS-ECU connector C-118 in good condition?
YES: Go to Step 11.
NO: Repair or replace the connector. Refer to Harness Connector Inspection. Check that the seat belt warning light illuminates normally.
STEP 11. Check the wiring harness between combination meter connector C-42 and ETACS-ECU connector C-118.
Q: Is the wiring harness between combination meter connector C-42 and ETACS-ECU connector C-118 in good condition?
YES: No action to be taken.
NO: Repair the wiring harness. Check that the seat belt warning light illuminates normally.
Inspection Procedure J-1
Headlight, Tail Light: Tail Lights does not Illuminate Normally.
NOTE: This troubleshooting requires use of scan tool MB991502 and SWS monitor kit MB991862. For details of how to use the SWS monitor, refer
to "How to use SWS monitor."