Eclipse RS L4-2350cc 2.4L SOHC MFI (2002)
position light (LH), tail lights (LH), side marker light (LH) and license plate light: Go to Step 2.
position light (RH), tail lights (RH) and side marker light (RH): Go to Step 4.
tail lights, side marker lights and license plate light: Go to Step 6.
tail lights (LH), side marker light (LH) and license plate light: Go to Step 8.
tail lights (RH) and side marker light (RH): Go to Step 10.
position light (LH): Go to Step 12.
position light (RH): Go to Step 18.
tail light (LH): Go to Step 24.
tail light (RH): Go to Step 30.
rear side marker light (LH): Go to Step 36.
rear side marker light (RH): Go to Step 42.
license plate light: Go to Step 48.
All lights : Refer to Inspection Procedure L-1 "Tail lights do not illuminate."
STEP 2. Check front combination light (LH) connector A-26 and front-ECU connector A-10X for damage.
Q: Are front combination light (LH) connector A-26 and front-ECU connector A-10X in good condition?
YES: Go to Step 3.
NO: Repair or replace the connector. Refer to Harness Connector Inspection. The position light (LH), the tail light (LH), the side marker light (LH)
and the license plate lights should illuminate normally.
