mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2093 > < Initial Inspection and Diagnostic Overview|Page 2091
Page 176
background image

STEP 8. Check rear combination light (LH) connector F-17 and front-ECU connector A-10X for damage.

Q: Are rear combination light (LH) connector F-17 and front-ECU connector A-10X in good condition?

YES: Go to Step 9.

NO: Repair or replace the connector. Refer to Harness Connector Inspection. The tail light (LH), side marker light (LH) and the license plate lights
should illuminate normally.

STEP 9. Check the wiring harness between rear combination light (LH) connector F-17 and front-ECU connector A-10X.

Initial Inspection and Diagnostic Overview|Page 2093 > < Initial Inspection and Diagnostic Overview|Page 2091