Eclipse RS L4-2350cc 2.4L SOHC MFI (2002)
STEP 25. Check the wiring harness between rear combination light (RH) connector F-09 and ETACS-ECU connector C-119.
NOTE: Also check junction block connector C-101. If junction block connector C-101 is damaged, repair or replace the connector as described in
Harness Connector Inspection.
Q: Is the wiring harness between rear combination light (RH) connector F-09 and ETACS-ECU connector C-119 in good condition?
YES: Replace the rear combination light socket assembly (RH). Check that the turn-signal lights illuminate normally.
NO: Repair the wiring harness. Check that the turn-signal lights illuminate normally.