mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2165 > < Initial Inspection and Diagnostic Overview|Page 2163
Page 248
background image

YES: Go to Step 9.

NO: Repair the wiring harness. Check that the fog lights illuminate normally.

STEP 9. Check fog light relay connector A-04X, fog light connectors A-28, A-31 and combination meter connector C-43 for damage.

Q: Are fog light relay connector A-04X, fog light connectors A-28, A-31 and combination meter connector C-43 in good condition?

YES: Go to Step 10.

NO: Repair or replace the connector. Refer to Harness Connector Inspection. Check that the fog lights illuminate normally.

Initial Inspection and Diagnostic Overview|Page 2165 > < Initial Inspection and Diagnostic Overview|Page 2163