mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2171 > < Initial Inspection and Diagnostic Overview|Page 2169
Page 254
background image

NO: Repair the wiring harness. Check that the fog lights illuminate normally.

STEP 6. Check fog light relay connector A-04X and fog light (LH) connector A-28 for damage.

Q: Are fog light relay connector A-04X and fog light (LH) connector A-28 in good condition?

YES: Go to Step 7.

NO: Repair or replace the connector. Refer to Harness Connector Inspection. Check that the fog lights illuminate normally.

STEP 7. Check the wiring harness between fog light relay connector A-04X and fog light (LH) connector A-28.

Q: Is the wiring harness between fog light relay connector A-04X and fog light (LH) connector A-28 in good condition?

YES: No action to be taken.

Initial Inspection and Diagnostic Overview|Page 2171 > < Initial Inspection and Diagnostic Overview|Page 2169