mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2185 > < Initial Inspection and Diagnostic Overview|Page 2183
Page 268
background image

STEP 5. Check the wiring harness between dome light connector D-04 <ECLIPSE-vehicles without sunroof>, D-03 <ECLIPSE SPYDER,
ECLIPSE-vehicles with sunroof, without vanity mirror light> or D-25 <ECLIPSE-vehicles with sunroof and vanity mirror light> and
ETACS-ECU connector C-119.

NOTE:  Also check junction block connector C-102. If junction block connector C-102 is damaged, repair or replace the connector as described in
Harness Connector Inspection.

Q: Is the wiring harness between dome light connector D-04 <ECLIPSE-vehicles without sunroof>, D-03 <ECLIPSE SPYDER, ECLIPSE-vehicles with
sunroof, without vanity mirror light> or D-25 <ECLIPSE-vehicles with sunroof and vanity mirror light> and ETACS-ECU connector C-119 in good
condition? 

YES: No action to be taken.

NO: Repair the wiring harness. Check that the dome light illuminates normally.

Initial Inspection and Diagnostic Overview|Page 2185 > < Initial Inspection and Diagnostic Overview|Page 2183