mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2234 > < Initial Inspection and Diagnostic Overview|Page 2232
Page 317
background image

STEP 5. Check backup light switch connector B-37 and ETACS-ECU connector C-117 for damage.

Q: Are backup light switch connector B-37 and ETACS-ECU connector C-117 in good condition?

YES: Go to Step 6.

NO: Repair or replace the connector. Refer to Harness Connector Inspection. If the rear wiper operates normally, it indicates that a correct "R"
position signal is sent from the backup light switch.

Initial Inspection and Diagnostic Overview|Page 2234 > < Initial Inspection and Diagnostic Overview|Page 2232