Eclipse RS L4-2350cc 2.4L SOHC MFI (2002)
STEP 8. Check the front passenger's door lock key cylinder switch.
Disconnect front passenger's door lock key cylinder switch connector E-06. Then check continuity between the switch terminals.
Q: Is the front passenger's door lock key cylinder switch in good condition?
YES: Go to Step 9.
NO: Replace the front passenger's door lock key cylinder switch. If the systems, which are described in "CIRCUIT OPERATION", work normally,
the input signal from the front passenger's door lock key cylinder switch should be normal.
STEP 9. Measure at front passenger's door lock key cylinder switch connector E-06 in order to check the ground circuit to the front
passenger's door lock key cylinder switch.
1. Disconnect front passenger's door lock key cylinder switch connector E-06, and measure at the harness side.
2. Measure the resistance value between terminal 2 and ground.
-
The measured value should be 2 ohm or less.
Q: Does the measured resistance value correspond with this range?
YES: Go to Step 12.
NO: Go to Step 10.
STEP 10. Check front passenger's door lock key cylinder switch connector E-06 for damage.
Q: Is front passenger's door lock key cylinder switch connector E-06 in good condition?
YES: Go to Step 11.
NO: Repair or replace the connector. Refer to Harness Connector Inspection. If the systems, which are described in "CIRCUIT OPERATION", work
normally, the input signal from the front passenger's door lock key cylinder switch should be normal.
