Eclipse RS L4-2350cc 2.4L SOHC MFI (2002)
STEP 4. Check rear wiper motor connector F-07 for damage.
Q: Is rear wiper motor connector F-07 in good condition?
YES: Go to Step 5.
NO: Repair or replace the connector. Refer to Harness Connector Inspection. If the rear wiper operates normally, it indicates that a correct auto-stop
signal is sent from the rear wiper motor.
STEP 5. Check the wiring harness between rear wiper motor connector F-07 and the ignition switch (ACC).
NOTE: Also check intermediate connector F-24 and junction block connectors C-101 and C-111. If intermediate connector F-24 or junction block
connector C-101 or C-111 is damaged, repair or replace the connector as described in Harness Connector Inspection.
Q: Is the wiring harness between rear wiper motor connector F-07 and the ignition switch (ACC) in good condition?
YES: No action to be taken.
NO: Repair the wiring harness. If the rear wiper operates normally, it indicates that a correct auto-stop signal is sent from the rear wiper motor.
