mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2314 > < Initial Inspection and Diagnostic Overview|Page 2312
Page 397
background image

STEP 3. Check the liftgate lock key cylinder switch <ECLIPSE> or the trunk lid lock key cylinder switch <ECLIPSE SPYDER> connector
F-10 for damage.

Q: Is the liftgate lock key cylinder switch <ECLIPSE> or the trunk lid lock key cylinder switch <ECLIPSE SPYDER> connector F-10 in good
condition?

YES: Go to Step 4.

NO: Repair or replace it. Refer to Harness Connector Inspection. When the theft-alarm system operates normally, check that the signal is input
normally from the liftgate lock key cylinder switch <ECLIPSE> or the trunk lid lock key cylinder switch <ECLIPSE SPYDER>.

STEP 4. Check the harness wire between the liftgate lock key cylinder switch <ECLIPSE> or the trunk lid lock key cylinder switch <ECLIPSE
SPYDER> connector F-10 and ground.

Q: Is the harness wire between the liftgate lock key cylinder switch <ECLIPSE> or the trunk lid lock key cylinder switch <ECLIPSE SPYDER>
connector F-10 and ground in good condition?

YES: There is no action to be taken.

Initial Inspection and Diagnostic Overview|Page 2314 > < Initial Inspection and Diagnostic Overview|Page 2312