Eclipse RS L4-2350cc 2.4L SOHC MFI (2002)
Transmission Temperature Sensor/Switch: Testing and Inspection
A/T FLUID TEMPERATURE SENSOR CONTINUITY CHECK
1. Remove the A/T fluid temperature sensor.
2. Measure the resistance between terminals 1 and 2 of the A/T fluid temperature sensor connector. Standard value:
3. If the A/T fluid temperature sensor resistance is not consistent with the fluid temperature, replace A/T fluid temperature sensor.
NOTE: The N range indicator light on the combination meter flashes when the temperature reaches approximately 125°C or higher, and then
stops flashing when the temperature drops below approximately 115°C.
