mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Evaporator Temperature Sensor / Switch > < Blower Motor Switch|Testing and Inspection
Page 1
background image

Compressor Speed Sensor: Testing and Inspection

REVOLUTION PICK-UP SENSOR CHECK

Measure the resistance between terminals 1 and 3. Check that the measured value is at the standard value.

Standard value: 405 ± 35 Ohms when the ambient temperature is 20 °C (68 °F)

Evaporator Temperature Sensor / Switch > < Blower Motor Switch|Testing and Inspection