Eclipse RS L4-2350cc 2.4L SOHC MFI (2002)
2. Align the edge of the coil spring to the stepped part of the shock absorber spring seat.
>>B<< UPPER BRACKET ASSEMBLY INSTALLATION
Install the upper bracket assembly so that the lower bushing inner pipe of the shock absorber is at the position shown.
>>C<< JAM NUT INSTALLATION
1. Temporarily tighten the jam nut.
CAUTION: Do not use an impact wrench to tighten the jam nut, otherwise the jam nut will be damaged.
2. Remove special tools MB991237 and MB991239, and then tighten the jam nut to 23 ± 2 Nm (17 ± 1 ft. lbs.).