Eclipse RS L4-2350cc 2.4L SOHC MFI (2002)
1. Install the special tools MB990998 and MB990326 to the front hub assembly and tighten the nut to the specified torque.
Tightening torque: 226 ± 29 Nm (167 ± 21 ft. lbs.)
2. Measure the wheel bearing breakaway torque with special tool MB990326.
Limit: 1.0 Nm (9 inch lbs.) or less
3. Wheel bearing breakaway torque must be under the limit value and there should be no roughness when rotating the hub.
WHEEL BEARING END PLAY CHECK
1. Install the special tool MB990998 to the front hub assembly and tighten the nut to the specified torque.
Tightening torque: 226 ± 29 Nm (167 ± 21 ft. lbs.)
2. Measure the play in the hub axial direction.
Limit: 0.05 mm (0.002 inch)
3. If the play exceeds the limit, replace the front hub assembly.
