Eclipse RS L4-2350cc 2.4L SOHC MFI (2002)
c. Return the drum to its original position while holding the wires to make sure that they do not pull out.
6. After installing the power window motor assembly to the window regulator assembly, cut and remove the wires witch are compressing the
springs.
3. Operation check
CAUTION:
-
Do not operate the window regulator assembly before installing the window glass, otherwise the limit switch will be set.
-
Window glass safety mechanism does not operate when the window glass is closed fully at first time.
1. Install the window glass to the window regulator assembly.
2. Close the window glass completely.
NOTE: Closing the window glass completely will finish the adjustment of the limit switch
3. Check that the limit switch operates correctly.
>>B<< DOOR WINDOW GLASS INSTALLATION
1. Temporarily secure the door window glass to the door window regulator.
2. After raising the door window glass as far as it will go, fully secure the door window glass to the door window regulator assembly.
