Eclipse RS FWD L4-1997cc 2.0L DOHC MFI (1997)
If the free play exceeds the standard value, it is probably due to excessive play between the retaining ring bolt and brake pedal arm. Check for
excessive clearance and replace faulty parts as required.
1. Pull the carpeting from below the brake pedal and start the engine.
2. Depress the brake pedal with approximately 490 N (110 lbs.) of force.
3. Measure the clearance between the brake pedal and the floorboard. The standard value is 90 mm (3.5 inches) or more.
4. If the clearance is outside the standard value, check for air trapped in the brake line, clearance between the lining/drum and dragging in the parking
brake. Adjust and replace defective parts as required.
5. Turn back the carpet to its original position.
