Eclipse RS FWD L4-1997cc 2.0L DOHC MFI (1997)
Wheel Cylinder Assembly
9. Reverse procedure to install, noting the following:
-
Lubricate the areas shown in the illustration.
-
Use alcohol, DOT 3 or DOT 4 brake fluid to clean the wheel cylinder and the piston and ensure that the hydraulic system is bled, refer to "
Brake Bleeding"
See: Brake Bleeding/Service and Repair
-
Apply the DOT3 or DOT4 brake fluid to the piston cups and tool No. MB990619.
Set Piston Cup Into Piston Groove
-
Set the piston cup on tool No. MB990620 with the lip of the cup facing up, fit the cup onto the special tool, and then slide it down the outside
of the tool into the piston groove.
