Eclipse RS FWD L4-1997cc 2.0L DOHC MFI (1997)
INSTALLATION
1. Install camshaft seal into cylinder head using Special Tool MD998713 until flush with the head.
NOTE:Shaft seal lip surface must be free of varnish, dirt or nicks. Polish with 400 grit paper if necessary.
2. Install rear timing belt cover. Tighten fasteners to 9.6 Nm (6.9 ft.lbs.).
3. Install support bracket.
4. Install camshaft sprockets and tighten attaching bolts to 101 Nm (73 ft.lbs.).
5. Install idler pulley.
6. Install tensioner arm bracket.
7. Install timing belt tensioner.
8. Install tensioner pulley.
