Eclipse RS FWD L4-1997cc 2.0L DOHC MFI (1997)
Air Bag Module (Front Passenger's Side)
Air Bag Module (Front Passenger's Side) Removal Steps
-
Post-installation inspection
1. Negative (-) battery cable connection
7. Air bag module (Front passenger's side)
-
Pre-installation inspection
Step 1: Negative (-) Battery Cable Disconnection
Disconnect the negative battery cable from the battery and tape the terminal.
CAUTION: Wait at least 60 seconds after disconnecting the battery cable before doing any further work.
Step 2: Air Bag Module (driver's Side) Removal
1. Remove the air bag module mounting nut using a socket wrench from the back side.
2. When disconnecting the connector of the clock spring from the air bag module, press the air bag's lock toward the outer side to spread it open. Use
a flat-tipped screwdriver to pry so as to remove the connector gently.
