Eclipse Spyder AWD L4-1997cc 2.0L DOHC Turbo 16 Valve (1996)
Evaporative Emission Control Canister: Service and Repair
Pre-removal and Post-installation Operation
Battery Removal and Installation
Removal steps
1. Battery bracket
2. Shift cable and select cable connection
3. Vapor hose
4. Connector
5. Vapor hose
6. Fuel tank pressure relief valve
7. Vapor hose
8. Vapor hose <2.OL Engine (Turbo)>
9. Check valve <2.OL Engine (Turbo)>
10. Clamp <2.OL Engine (Turbo)>
11. Purge hose <2.OL Engine (Turbo)>
12. Purge control valve <2.OL Engine (Turbo)>
13. Evaporative emission canister
14. Evaporative emission canister holder assembly
INSTALLATION SERVICE POINT
A. FUEL TANK PRESSURE RELIEF VALVE INSTALLATION
Install the fuel tank pressure relief valve in the direction shown above.
INSPECTION
