mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Neutral Safety Switch|Testing and Inspection|Page 3717 > < Ignition Switch Lock Cylinder|Service and Repair
Page 1
background image

Neutral Safety Switch: Testing and Inspection

1. Disconnect electrical connector from switch.

Fig. 29  PNP Switch N & P Position Inspection

Fig. 30  PNP Switch N & P Position Inspection

2. Place selector lever in the N, then P ranges to check switch. Check continuity between terminals as shown in Fig. 29 and 30.

Neutral Safety Switch|Testing and Inspection|Page 3717 > < Ignition Switch Lock Cylinder|Service and Repair