Eclipse Spyder FWD L4-2350cc 2.4L SOHC 16 Valve (1996)
Technical Service Bulletin # 96-52A-004
Date: 960901
Headliner - Sags
NO.: TSB-96-52A-004
DATE: September, 1996
MODEL: 1996 Eclipse Spyder
SUBJECT:
SAGGING HEADLINER
PURPOSE
This bulletin contains information on how to correct headliner sagging on the 1996 Eclipse Spyder Convertible.
AFFECTED VEHICLES
1996 Eclipse Spyder Convertible produced before March 9, 1996
PARTS INFORMATION
If you encounter a sagging old style headliner (one that attaches to the rear of the top cover) remove it and replace it with the part number listed. The new
headliner attaches to the top of the rear window as shown in the instructions in this bulletin.
WARRANTY INFORMATION
Headliner Installation (Includes hook/loop fastener replacement)
Nature Code: 86Z
Cause Code: 440
Labor Operation Number: 52410110
Time Allowance: 1.0 hrs
Headliner Repair # 1 Bow Dual lock Fastener Replacement
Nature Code: 86Z
Cause Code: 440
Labor Operation Number: 42386000
Time Allowance: 1.0 hrs
Warranty Coverage: 36 months/36,000 miles
Special Warranty Information:
Headliner replacement and/or # 1 bow fastener repair on an as needed basis only
Background Information
-
Headliners on early production vehicles (produced before March 9, 1996) attach to the top cover above the rear glass. These early headliners should
be replaced if a sagging condition occurs. Replacement headliners have the loop fastener for headliner attachment lined up to the top of the rear
window glass. When installing a replacement headliner on an early production vehicle, a new hook fastener must be added to the glass to provide an
attachment point for the new style headliner.
-
The headliner on some vehicles may sag or pull away from the top edge of the rear glass. This is caused by the hook fastener adhesive coming loose
from the window glass. If this condition occurs, remove the old hook fastener from the glass and install a new hook fastener.