Eclipse Spyder FWD L4-2350cc 2.4L SOHC 16 Valve (1996)
Weather Holder Adjustment
Note
^
The illustrations show the top in the closed or up position while measuring the distances between the rails and the weatherstrip holders at the
front and rear screws of each holder. The top can, however, be either fully open or closed.
^
Specifications shown in the illustration are based on optimal design positions under ideal conditions. However, real-world conditions must be
considered, such as, normal wear-and-tear; variance in parts (old versus new); variance in vehicle build tolerances; etc. Therefore, some or all
of the specifications may not be fully attainable. Use these specifications as a guide, reference, or base-line for adjustment purposes.
^
The weatherstrip must be removed from the holder to take the measurements and to make any necessary adjustment.
^
Remember that weatherstrip holder adjustments and window adjustments are closely related and must be checked together to achieve proper
water leak sealing.
1.
Either open the door or lower the window on the side of the vehicle requiring adjustment.
2.
Remove the weatherstrip requiring adjustment from its holder.
3.
Measure the distance between the rail and the holder as shown in the illustration. Take the measurements at the locations of the holder attaching
