Eclipse Spyder FWD L4-2350cc 2.4L SOHC 16 Valve (1996)
3.
Detach the weatherstrip from the retainer at the top area of the A-pillar to gain access to the underside of the weatherstrip (about 150
mm in both directions is sufficient for removal from retainer).
4.
Locate the mold seam opening in the part and separate the glue holding it together.
5.
Insert a front stuffer from kit P/N MR311150 into the weatherstrip seam opening. Refer to the illustration in Step 1 for stuffer
orientation.
NOTE:
The longer part of stuffer is on the side closest to the retainer.