mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Valve Lash Adjuster Noise - Troubleshooting Procedures|Page 1053 > < Valve Lash Adjuster Noise - Troubleshooting Procedures|Page 1051
Page 1
background image

Rocker Arm Assembly: Testing and Inspection

1. Check the roller surface. If any dents, damage or seizure is evident, replace the rocker arm.
2. Check the rotation of the roller. If it does not rotate smoothly or if looseness is evident, replace the rocker arm.
3. Check the inside diameter. If damage or seizure is evident, replace the rocker arm.

Valve Lash Adjuster Noise - Troubleshooting Procedures|Page 1053 > < Valve Lash Adjuster Noise - Troubleshooting Procedures|Page 1051