Eclipse Spyder FWD L4-2350cc 2.4L SOHC 16 Valve (1996)
9. Install the counterbalance shaft oil seal and the oil pump oil seal.
10. Install the crankshaft front oil seal into the front case.
11. Apply engine oil amply to the oil pump driven/drive gears and line up the alignment marks.
12. Coat the threads of oil pressure switch with 3M ATD Part No.8660, or equivalent sealant, and install the switch.
CAUTION:
-
Keep the end of threaded portion clear of sealant.
-
Avoid overtightening.
