Eclipse Spyder FWD L4-2350cc 2.4L SOHC 16 Valve (1996)
ITEMS INDICATED BY THE CHECK ENGINE/MALFUNCTION INDICATOR LAMP
NOTE:
1. After the power train control module detects a malfunction, the check engine/malfunction indicator lamp illuminates when the engine is next
turned on and the same malfunction is re-detected.
However, for items marked with a "*", the check engine/malfunction indicator lamp illuminates on the first detection of the malfunction.
2. After the check engine/malfunction indicator lamp illuminates, it will be switched off under the following conditions.
-
When the powertrain control module monitored the powertrain malfunction three times* and detected no malfunction.
*: In this case, one time indicates from engine start to stop.
-
For misfiring or a fuel trim malfunction, when driving conditions (engine speed, engine coolant temperature, etc.) are similar to those when the
malfunction was first recorded. In addition, the powertrain control module has detected no malfunction.
Caution: If the check engine/malfunction indicator lamp illuminates because of a malfunction of the powertrain control module, transmission
between the scan tool and the powertrain control module cannot occur. In this case, the diagnostic trouble code cannot be read.
