Eclipse Spyder FWD L4-2350cc 2.4L SOHC 16 Valve (1996)
EGR Valve: Testing and Inspection
EGR Valve Check
1. Remove the EGR valve and inspect for sticking, carbon deposits, etc. If contaminants are found, clean the valve with a suitable solvent so it will
seat correctly.
2. Connect a hand vacuum pump to the EGR valve.
3. Apply 67 kPa (20 in.Hg) of vacuum, and check to be sure that the vacuum is maintained.
4. Apply vacuum according to the chart below and check the passage of air by blowing through either side of the EGR passages.
5. Replace the gasket, and tighten the valve to the specified torque.
Specified torque: 22 N-m (16 ft-lbs.)
