mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Neutral Safety Switch > < Ignition Lock|Service and Repair|Page 3483
Page 1
background image

Ignition Switch Lock Cylinder: Service and Repair

Steering Lock Cylinder Removal

1. Insert the ignition key into the steering lock cylinder and turn it to the "ACC" position.
2. Use a cross-tip (+) screwdriver (small) or a similar tool, Push the lock pin the steering lock cylinder inward and then pull the steering lock cylinder

toward you.

Neutral Safety Switch > < Ignition Lock|Service and Repair|Page 3483