Eclipse Spyder FWD L4-2350cc 2.4L SOHC 16 Valve (1996)
2. Cover rack serrations with special tool.
3. Apply specified fluid on special tool.
Specified fluid: Automatic transmission Fluid "DEXRON II"
4. Match oil seal centre with rack to prevent retainer spring from slipping and slowly insert rack from power cylinder side.
f.
Rack bushing installation (25).
Wrap the rack end with plastic tape, apply a coating of the specified fluid, and then install the rack bushing and rack stopper.
Specified fluid: Automatic transmission Fluid "DEXRON II"
CAUTION: Do not allow oil seal retainer spring to slip out.
g. Circlip installation (23).
Insert circlip to rack stopper hole through cylinder hole. Turn rack stopper clockwise and insert circlip firmly.
CAUTION: Insert circlip to rack stopper hole while turning rack stopper clockwise.
h. Oil seal installation (21).
Apply a coating of the specified fluid to the outside of the oil seal. Using the special tools, press the oil seal into the valve housing.
Specified fluid: Automatic transmission Fluid "DEXRON II"
