Eclipse Spyder FWD L4-2350cc 2.4L SOHC 16 Valve (1996)
(19) Install Checking Tool MB995047 and a torque wrench to check differential bearings turning torque. The turning torque should be 0.56 to 2.03 Nm
(5 to 18 in. lbs.). If the turning torque is too high, install a 0.05 mm (0.0020 in.) thinner shim. If the turning torque is too low, install a 0.05 mm
(.0020 in.) thicker shim. Repeat until proper turning torque is obtained.
(20) Install proper shim.
(21) Install bearing cup, and then press in using Installer Bar MB990938 and Installer Adapter MB990933.
(22) Install new oil seal, press in using Installer Cap MB998812 and Installer Adapter (56) MB998827.