Eclipse Spyder FWD L4-2350cc 2.4L SOHC 16 Valve (1996)
Fig. 24 Select Cable Connection
d. Adjust length of select cable then install cable onto gear selector assembly as shown, Fig. 24.
3. Install shift cable as follows:
a. Install shift cable on the transaxle end.
Fig. 25 Transaxle Control Position
b. Keeping select lever on transaxle in the Neutral position, move shift lever on transaxle into 4th gear as shown, Fig. 25.
Fig. 26 Shift Cable Connection
c. Position gear selector lever into the 4th gear position, Fig. 26, and adjust length of shift cable and install cable onto the gear selector lever as
shown.
4. Ensure transaxle controls function properly.
