Eclipse Spyder FWD L4-2350cc 2.4L SOHC 16 Valve (1996)
4.
Reinstall the beltline moulding and the door trim.
5.
Raise and lower the window a few times to verify that the noise is eliminated.
Parts Information
PART NUMBER
DESCRIPTION
MB321765
Glass Guide Slider, LH
MB321766
Glass Guide Slider, RH
There is no change of part number for the new style glass guide slider. The new style part has an additional drilled hole for identification. Use only the
new style part for this repair. DO NOT use an old style glass guide slider which does not have the additional hole.
To complete the procedures in this bulletin the following locally procured supplies will be required in addition to the parts listed.
^
Foam Tape -
(75 mm x 50 mm x 2 mm thick)
^
Lubricating Grease
^
Double-Sided Tape 3M # 4210 - (990 mm x 7 mm x 1.2 thick)
Warranty Information
A.
GREASING THE GLASS GUIDE TRACK
Nature Code: 81Z
Cause Code: 230
Labor Operation No. 42412490
Time Allowance: 1.4 hrs.
B.
GLASS GUIDE RATTLE REPAIR (REPLACEMENT OF GLASS GUIDE SLIDER)
Nature Code: 81Z
Cause Code: 450
Labor Operation No. 42412410
Time Allowance: 1.6 hrs.
C.
OUTER BELTLINE MOULDING RATTLE REPAIR (INSTALLING FOAM TAPE)
Nature Code: 81Z
Cause Code: 990
Labor Operation No. 42413300
Time Allowance: 0.5 hr.
D.
INNER BELTLINE MOULDING REPAIR (INSTALLING FOAM AND DOUBLE-SIDED TAPE)
Nature Code: 81Z
Cause Code: 990
Labor Operation No. 51625200
Time Allowance: 0.3 hr.
Warranty Coverage: 36 months/36,000 miles.
Special Warranty Information: Normal warranty procedures apply.