Eclipse Spyder GS-T L4-1997cc 2.0L DOHC Turbo MFI (1998)
<2.0L ENGINE (TURBO) AND 2.4L ENGINE>
WATER PUMP
Removal
Pre-removal Operation:
-
Engine Coolant Draining and Supplying.
-
Timing Belt Removal.
Follow removal steps outlined in illustration.
Installation
Installation in reverse order as removal.
>A< O-Ring Installation.
Insert the O-ring to the water inlet pipe, and coat the outer circumference of the O-ring with water or engine coolant. By coating with water or
engine coolant, the insertion to the water pump will become easier.
CAUTION:
1. Do not allow engine oil or other grease to adhere to the O-ring.
2. When inserting the pipe, check that there is no sand, dirt, etc, on its inner surface.
