Eclipse Spyder GS-T L4-1997cc 2.0L DOHC Turbo MFI (1998)
Drive Belt: Adjustments
GENERATOR DRIVE BELT TENSION CHECK
Use the belt tension gauge to check belt tension at the shown point or check deflection by applying 98 Nm (22 lbs.) to the shown point.
Standard value:
Tension: 245 - 490 Nm (55.1 - 110.2 lbs.)
Deflection <Reference value>:
9.0 - 11.5 mm (0.35 - 0.45 inch)
GENERATOR DRIVE BELT TENSION ADJUSTMENT
1. Loosen the nut of the generator pivot bolt.
2. Loosen the lock bolt.
3. Turn the adjusting bolt to adjust the belt tension or deflection to the standard value.
4. Tighten the nut of the generator pivot bolt.
Tightening torque: 23 Nm (17 ft. lbs.)
5. Tighten the lock bolt.
Tightening torque: 23 Nm (17 ft. lbs.)
6. Tighten the adjusting bolt.
