Eclipse Spyder GS-T FWD L4-1997cc 2.0L DOHC Turbo MFI (1997)
the en-tine.
c. Select a proper bearing from the illustration on the basis of the identification data confirmed under Items a and b.
Example
1. If the measured value of a crankshaft journal outer diameter is between 56.994 - 57.000 mm (2.2439 - 2.2441 inch), the journal is
classified as "1" in the illustration. In case the crankshaft is also replaced by a spare part, check the identification colors of the journals
painted on the new crankshaft. If the color is yellow, for example, the journal is classified as "1".
2. Next, check the cylinder block bearing hole identification mark stamped on the cylinder block. If it is "0", read the "Bearing identification
mark" column to find the identification mark of the bearing to be used. In this case, it is "1".
d. Install the bearings having an oil groove to the cylinder block.
e. Install the bearings having no oil groove to the bearing caps.
4. Install the bearing cap so that its arrow faces toward the timing belt.
