Eclipse Spyder GS-T FWD L4-1997cc 2.0L DOHC Turbo MFI (1997)
Alignment: Service and Repair
Rear Suspension
Toe-In
The rear suspension and wheels should be serviced to normal condition prior to wheel alignment.
Standard value: 0 to 6 mm (0 to .24 inch)
Turn the toe control arm mounting bolt to the left or right by equal amounts to adjust.
L.H.: Turning clockwise toe-out direction.
R.H.: Turning clockwise toe-in direction.
Furthermore, toe adjustment can be made at graduations of approximately 1.3 mm (.05 inch).
Camber
NOTE:
1. Camber is preset at the factory and cannot be adjusted.
2. If camber is not within the standard value, check and replace bent or damaged parts.
Standard value:
Vehicles With 14-Inch Wheels: -1° 50' to -0° 50'
Vehicles With 16-Inch Wheels: -2° 10' to -1° 10'
